Deutsche Institut fur Normung
History of the DIN Rail Instead, DIN stands for Deutsche Institut fur Normung, which translates loosely as “German Institute for Standards.” DIN is a German organization that establishes standards for industrial and electrical equipment.
What is DIN rail size?
Standard DIN Rails are available in 35mm (7.5 and 15mm deep), 32mm and 15mm widths and are supplied in 1 m (3’3″) and 2 m (6’6”) lengths.
Are all DIN rails the same?
As you might expect, the miniature top hat or TS15 DIN rails are the same shape as the above type, only smaller. The two standards differ predominantly in terms of their edge-to-edge width, with TS15 rails measuring just 15mm wide.
What is a DIN rail enclosure?
DIN rail enclosures are a protective case for protecting electrical devices and components. They enable electronic devices to be mounted onto equipment racks. Also known as top hat rail enclosures, DIN rail enclosures are mounted onto a standard sized metal rail within a rack.
Are DIN rails grounded?
With the use of a DIN rail ground (protective conductor) terminal block, the DIN rail itself can be used as the grounding busbar. This system allows all control components and their ground requirements to be placed on the same rail and in the same location (a separate ground busbar is no longer required).
What are the different types of DIN rail?
Types. There are three major types of DIN rail: Top hat section (TH), type O, or type Ω, with hat-shaped cross section.
Why is it called DIN rail?
The name DIN-Rail was based on the DIN (Deutsche Industrie Norm) (translation: German Industrial Standard) which defined the dimensions and tolerances of the rail in order to allow manufacturers to design mounting and assembly methods for products destined for assembly onto the rail.
How much weight can a DIN rail hold?
It can hold components up to 1.1lbs in weight. DIN rails can be mounted simply by using several STEGOFIX units. If the weight of attached components exceeds the load limit or if a more secure mounting is desired, it can also be screw-mounted.
What is the purpose of DIN rail used in control panel wiring?
A DIN rail is a standard type metal rail that is utilized for mounting circuit breakers and industrial control equipment in equipment racks. In addition, it acts as a mechanical support structure for different types of small electrical parts.
What is a DIN Switch?
Compact DIN Rail Switches Industrial-grade Unmanaged Switches are “plug & play” devices specifically designed to connect equipment in network environments that are subject to extreme operating temperatures of -40°C to 75°C, vibrations, and shocks.
How do you ground a DIN rail?
Secure the DIN rail to the backplate with the screws and washers included with the DIN rail. If a ground wire is included, slide the eyelet on one end of the ground wire over one of the mounting screws prior to securing the DIN rail. The other end of the ground wire is secured to the enclosure ground terminal.
What is a DIN rail?
Mount and reposition components without drilling leaky holes in your steel enclosure— a strong magnet holds these DIN rails in place. Since they install without screws, they fit in spaces that are too small for a screwdriver. DIN rails meet UL 94 V- 0, which means they self-extinguish within 10 seconds and won’t spread fire by dripping.
How do you cut a DIN rail without a bur?
Pull the lever on these cutters to make smooth cuts in steel and aluminum DIN rail without leaving a bur. To cut the same length over and over, slide the stop along the ruler and clamp in place. Cutters mount to your workbench. Cutters with hole punch stamp an oblong hole.
What is the UL94 V-0 rating for DIN rails?
DIN rails meet UL 94 V- 0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping. For technical drawings and 3-D models, click on a part number. Protect development boards from dust, water, and debris by mounting them to DIN rails inside control cabinets.
How do you add a DIN rail to a strut?
Use strut channel nuts (sold separately) to add a DIN rail at any point along the channel, then clip on terminal blocks and other parts. To adjust spacing, loosen the strut channel nuts and slide the rail along the channel. For technical drawings and 3-D models, click on a part number.
