The 4 most common health and safety hazards of welding include:
- Welding Hazard #1: Exposure to Fumes and Gases.
- Welding Hazard #2: Physical Hazards.
- Welding Hazard #3: Electric Shock.
- Welding Hazard #4: Fire and Explosion.
What are the 7 hazards of welding?
Welding Hazards can be roughly broken into seven risks categories:
- Electrical hazards.
- Heat-related risks.
- Related risks.
- Fire –related risks.
- Asphyxiation risks.
- Fumes/respiratory risks.
- Gas use and storage.
What are 3 hazards you might face while welding?
Here are some of the major hazards workers may encounter when welding and how to protect against them.
- Fires and explosions.
- Burn hazards.
- Radiation.
- Electricity.
- Fumes and gases.
- Other hazards.
What are the safety practices in welding?
Welding Safety Precautions
- Welding helmets with side-shields. Welding helmets protect you from UV radiation, particles, debris, hot slag and chemical burns.
- Respirators. Respirators protect you from fumes and oxides that the welding process creates.
- Fire resistant clothing.
- Ear protection.
- Boots and gloves.
What is personal safety?
Your personal safety is a general recognition and avoidance of possible harmful situations or persons in your surroundings.
What are the top 10 safety rules when welding?
10 Arc Welding Safety Tips
- Tip #1 – Read the owner’s manual, warning labels and relevant codes.
- Tip #2 – Avoid electric shock.
- Tip #3 – Shield eyes and skin from UV light.
- Tip #4 – Avoid burns.
- Tip #5 – Maintain your equipment.
- Tip #6 – Avoid breathing fumes.
- Tip #7 – Protect your eyes and ears.
- Tip #8 – Wear the right gear.
Why can’t you look at a welding flame?
A flash burn occurs when you are exposed to bright ultraviolet (UV) light. It can be caused by all types of UV light, but welding torches are the most common source. That’s why it’s sometimes called ‘welder’s flash’ or ‘arc eye’. Flash burns are like sunburn in the eye and can affect both your eyes.
Are there any physical hazards associated with welding?
Exposure to fumes and gases can be controlled by adhering to these safety precautions. Physical hazards that can cause burns, eye damage, cuts, and crushed toes and fingers are ever-present when welding.
Why are electric shocks a hazard in welding?
Electric shocks are a common physical hazard and can occur when you touch a part of the welding or electrode circuit. Shocks also happen if your equipment is damaged or you are trying to weld in wet conditions. Keep your equipment properly maintained and never work in water unless you are wearing propper gear for such conditions.
When to report a welding hazard to a supervisor?
If the air in your breathing zone is not clear, or if breathing is uncomfortable, check to be sure the ventilation equipment is working and report concerns to a supervisor so your exposure to substances in the welding fume can be checked. This is especially important when welding with stainless steel or hardfacing products.
What’s the best way to avoid a welding accident?
Avoid rolling up sleeves or pant cuffs, as sparks or hot metal will deposit in the folds and may burn through the material. Keep pants over the top of work boots – don’t tuck them in. Even when wearing a helmet, always wear safety glasses with side shields or goggles to prevent sparks or other debris from hitting the eyes.
