Pull the Slide off the Front of the Gun Frame. Place the Slide Upside Down and Remove the Guide Rod, Recoil Spring and Barrel. Kimber Pro Carry II Completed disassembly. You have now successfully performed the disassembly of a Kimber Pro Carry II or Ultra Carry 1911 pistol.
Do you need a wrench to disassemble a Kimber 1911?
Disassembly of a Kimber 1911 with a Barrel Bushing Disassembly Tools. You will likely need a Barrel Bushing Wrench for this procedure. There are some 1911 Models that will allow you to do this with your fingers, but my experience with my Kimber is that a wrench is definitely needed!
Can You disassemble a Kimber Aegis elite custom 1911 in 45 ACP?
This tutorial will show you step-by-step how to disassemble, break down or Field Strip a 1911 Semi-Automatic Pistol in .45 ACP. Specifically I will be showing the disassembly of a Kimber Aegis Elite Custom 1911 in 45 ACP. Removing the slide on a 1911 is not hard once you have done it a couple times.
What is a kimkimber 5″ 1911 called?
Kimber calls their 5″ models “Custom”, such as Master Carry Custom. A Pro Carry will have 4″ bull barrel, and a 3″ Barrel 1911 will be called an “Ultra Carry”. These will be addressed in another tutorial.
What happened to the firing pin on my Kimber?
A stress riser was created in the pin (perhaps at the location of a manufacturing defect?), and the tip sheared off. Thankfully, the broken firing pin was discovered during routine inspection and maintenance. The gun was sent to Kimber, who quickly replaced the firing pin and firing pin spring under warranty.
Who made kimkimber’s gun?
Kimber marketing teased all of us with an ad that hinted at what was coming, and a few sources leaked some info about the gun. Excited about what I heard, I mentioned the gun to Grant Cunningham when I was on the phone with him prior to the show, and was surprised to learn that he had been part of the team that created it.
