Connect Power over Ethernet to the Data port, and connect an Ethernet cable between your computer and the Config port. Configure device settings in the airFiber Configuration Interface. Once configuration is complete, disconnect the cables to move the airFiber radios. Reconnect at the site.
How do I reset my airFiber 24?
Reset To reset to factory defaults, press and hold the Reset button for more than five seconds while the unit is powered on. Data 10/100/1000 Mbps port handles all user traffic.
How does Ubiquiti airFiber work?
airFiber can transmit data synchronously without any wait time. Based on the ranging algorithm built into the air protocol, the airFiber radios use patent-pending HDD technology to calculate the propagation delay and know when each radio can transmit and receive, so they send packets in precise synchronization.
How do you reset Air fiber?
Begin by pressing the reset button. While holding button down, power the unit on. Wait 8 seconds then release the button (if you want to reset the unit to factory defaults, wait at least 15 seconds). Signal LEDs will be lit indicating that the device is ready for recovery.
How do I install airFiber?
Connect Power over Ethernet to the Data port, and connect an Ethernet cable between your computer and the Management port. Configure the device settings in the airFiber Configuration Interface. Once configuration is complete, disconnect the cables to move the airFiber radios. Pre-assemble the mounting hardware.
How do I connect airFiber 5XHD?
Connect the airFiber PoE Adapter to the Data port, and connect your computer to the MGMT port. Configure the AF-5XHD. Recommended: Install the IP67 Upgrade Kit (included) to prevent intrusion by water, dust, and insects. Install a ground wire and mount the AF-5XHD on an airFiber X or RocketDish antenna.
How reliable is AirFiber?
Resilient and reliable: AirFiber is impervious to storms that are capable of knocking out cable and phone line connections. Even during the fiercest rainstorms, you can typically expect performance to remain at 90-95%.
Is Air fiber good for gaming?
AirFiber Rural Internet is great reliable internet at an affordable price that never changes. Having AirFiber Rural Internet services means enjoying continued access to the web, stream shows, movies, and online gaming. AirFiber Internet provides a guaranteed 99% uptime with no data restrictions.
What is airFiber Internet?
AirFiber internet is a fixed wireless, high-speed broadband service that utilizes fixed-location microwave radio towers instead of phone or cable lines to deliver internet access to your location. To access airFiber, a 4- to 16-inch antenna is installed on the roof, along with a low-powered radio receiver/transmitter.
How do I set up airFiber 5X?
Installation Overview Configure the AF-5X. Install a ground wire and mount the AF‑5X on an airFiber X antenna. At the installation site, install the airFiber X antenna with the mounted AF‑5X radio (see the antenna’s Quick Start Guide for installation instructions). Secure the ground wire and mount the GPS antenna.
How do you align airFiber 5X?
Open up the alignment tool in the AirOS WebUI and have one installer slowly adjust the azimuth on one antenna until you see the signal get better, then worse again. Once you are losing signal, start backing up the azimuth until you reach the peak signal.
Is AirFiber good for gaming?
Compatible with popular streaming devices and services: Rest assured that airFiber is well-suited for virtual private networks (VPNs), Voice over Internet Protocol (VoIP), static IPs, online gaming, smart TVs, tablets, and smartphones.
How do I configure the airfiber AF-24 to connect to my computer?
Connect an Ethernet cable from your computer to the Config port on the airFiber AF-24. Configure the Ethernet adapter on your computer with a static IP address on the 192.168.1.x subnet (for example, 192.168.1.100).
What are the dimensions of the airfiber AF24?
AF24 User Guide Appendix A: Specifications ® Appendix A: Specifications airFiber AF24 Dimensions 649 x 426 x 303 mm (25.55 x 16.77 x 11.93 in) Weight 10.5 kg (23.15 lb) (Mount Included) Operating Frequency 24.05 – 24.25 GHz Max. Power Consumption <…
How long is the wire on an airfiber radio?
Ground wires – min. 8 AWG (10 mm 2) and max. length: 1 meter. As a safety precaution, ground the airFiber radios to grounded masts, poles, towers, or grounding bars. WARNING: Failure to properly ground your airFiber units will void your warranty.
How do I change the network settings on my airfiber?
To change the network settings: Change the IP Address, Netmask, and other settings to make them compatible with your network. Click Change and then click Apply. Repeat the instructions in the airFiber Configuration section on your other airFiber radio.
