How do I reset my Samsung SHS 2920?

Open the battery cover and press [Register] button briefly.

How do you reset a smart door lock?

1 Factory Reset

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do I change my password on my SHS P717?

Press the [Register] button briefly. Enter ’99’ when the number pad is lighted, and press the [*] button. Enter the new password (4 to 12 digits) and press the [*] button. The password can be 4~12 digits number.

How do I reset my SHS P717?

SHS-P717 – How to factory reset

1. Unlock and open the door.
2. Press and hold the [REG] button for 5 seconds or until the second set of beeps are heard.
3. Enter 4560852580 + *

How do you unlock a digital lock?

2 Method 2 of 3: Opening the Combination Lock

1. Turn the dial on the lock clockwise three times. Turn the dial to the right.
2. Stop turning when the marker points to the first number of the combination.
3. Turn the dial back to the left for one full turn.
4. Turn the dial to the right.
5. Open the lock.

How do I change my digital door lock password?

Open the battery cover and press the [Registration] button briefly. Enter the master password (default is ‘1234’) and press the [*] button. Enter the new master password and press the [*] button.

How do you reset an automatic door lock?

How do I reset a code on my Powerbolt?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”