A nut driver is a tool for tightening nuts and bolts. It essentially consists of a socket attached to a shaft and cylindrical handle and is similar in appearance and use to a screwdriver. This allows one to use a single handle with a number of sizes instead of having a separate nut driver for each size.
What can I use instead of a nut driver?
Two coins. Who would think that money can be used as a makeshift tool? Take two large coins (2 pence coins work perfectly for this) and place them on either side of the nut. Grip the coins between the knuckles of your index and middle fingers for extra grip and twist in the direction needed to loosen the nut.
Is nut driver and hex driver the same?
Nut Drivers They are also known as a nut spinners and socket drivers. A first glance they looks similar to screwdrivers however, they have an integrated socket on the shaft. Nut drivers have a hexagonal shaped socket designed for hex bolts, so it’s as simple as choosing the right size driver for the job.
What is the function of nut driver?
A nut driver is a hand tool that you use to tighten nuts and bolts. It looks a lot like a screwdriver, but the shaft is typically hollow, at least partially, so you can thread a nut onto a bolt.
What socket sizes do electricians use?
(Tip: Personally, I find 1/4″, 1/2″, 7/16″ and 9/16″ to be most common as an industrial electrician.) Adjustable/Crescent Wrench – You will need one of these quite often, but usually only for light work.
Which of the tools is best known as Nut driver?
A nutdriver (also known as a “spintite”) consists of a socket wrench, generally six-sided, with a screwdriver-type handle. It usually has a hollow shaft, so that it can be used to run a nut a long way onto a bolt, with the excess length of the bolt going up inside the shaft.
What is a socket drive?
The drive socket is the square hole which is used to attach the socket to a turning tool such as a ratchet or wrench. Drive sockets can come in one of five sizes: 1/4″, 3/8″, 1/2″, 3/4″ and 1″. Unlike the socket head, drive sockets are always listed in imperial sizes.
Which of the tools is best known as nut driver?
What is a hex drive?
A hex key (also, Allen key and Allen wrench) is a simple driver for screws that have heads with internal hexagonal recesses (sockets). Hex keys are formed from a single piece of hard steel hexagonal rod having blunt ends that fit snugly into similarly-shaped screw sockets.
What is socket ratchet?
A ratchet and socket combination (sometimes called a socket wrench) lets you turn a nut or bolt without repositioning the tool on the fastener — like you need to do with a wrench when there isn’t enough room to turn it in a full circle. This can make the work quicker.
Do electricians use wrench?
Adjustable/Crescent Wrench – You will need one of these quite often, but usually only for light work. Pipe wrench – You will find many situations where a pipe wrench is invaluable. Often a set of Channellocks is all that is required for a apprentice electrician to carry.
How are nut drivers sized?
Nut drivers are sized according to the socket size on the end. It is possible to determine the size of a nut driver by the color of the handle. If the handles of plies are plastic-coated, electric shock is prevented.
