If you choose screws, you’ll need #12 or #14 screws. If you’re using bolts, use ¼” bolts. Screws should be long enough to get a grip in the stud, but not too long to puncture the outer skin of the trailer.
How much weight can e-track?
The E-Tracks provide a 6000-pound capacity (except for the 2-foot E-Track), which means the system can handle extra-heavy loads.
What size holes are in E track?
Expert Reply: The mounting holes on the E-Track such as # E19148 are 1/4 inch in diameter. The type and length fastener you use will depend on the surface material and thickness you are attaching it to. For example if your surface was ACQ treated wood you could use # TFX250ACQ which is 2-1/2 inches long.
Is E track stronger than L track?
L-Track is light, sleek and can be coordinated with the paint on your truck or trailer. E Track is stronger, heavier and much more industrial. Both will work inside of a trailer — just consider what you were trying to do.
What is the difference between vertical and horizontal e track?
Vertical E-Track has slots that run parallel with the track, whereas horizontal E-Track has slots that run perpendicular. Horizontal E Track gives you more tie down points per foot, however vertical E Track mounted on the wall lets you attach items perpendicular to the floor of the trailer.
What is AE Trac?
More videos on YouTube E-Track is a system of mounted steel rails with small slots in them. It is a very industrial product that is heavy, powerful and is common for trailers and vans. Not only that, it is the industry standard for cargo control.
How do you mount an e-track on a trailer?
When putting e-track in a trailer, it is best to find the wall studs – same applies if you are mounting it on the floor. Mark the studs with a marker or pencil and then you can attach your e-track to the wall/floor.
How do I attach my e-track to the wall/floor?
Mark the studs with a marker or pencil and then you can attach your e-track to the wall/floor. We have found #14 self tapping screws are great if you are attaching via the studs. 1/4″ bolts with nuts and washer work best if drilling through a thick plywood floor.
What are the different sizes of E-track?
An error occurred while retrieving sharing information. Please try again later. Etrack comes in many different sizes ( singles, 2′, 5′, 8′ and 10 feet ), as well as painted or galvanized. When putting e-track in a trailer, it is best to find the wall studs – same applies if you are mounting it on the floor.
What Screws do you use to fasten E-track to a trailer?
A hex head lessens the change of slippage while driving and the wide washer head creates excellent holding power. Available in a 3/4″ wood screw and 1-1/2″ wood screw. Check out this video for more in-depth information about fastening e-track to a trailer:
