Boat trailer guides, or guide-ons, attach to your trailer and help you easily, safely, and accurately load or unload your boat. They’re simple tools, but they can help you avoid accidents and damage to your boat. Available in many different styles and sizes, boat trailer guides offer you a lot of options.
How do you get a boat straight on a trailer?
The following is a simple method that works with any boat:
- Tie up your boat to the dock.
- Then attach a single long line to the bow and stern cleat.
- Back the trailer down deep enough that you can float the boat most of the way onto the trailer.
- Using the line you can control the boat as you walk down the dock.
How do trailer guides work?
Trailer guide-ons attach to each side of a trailer. Guide-ons are normally put towards the rear of the trailer but can be mounted in other locations. To load the boat with guide-ons one person backs the trailer into the water. Another person drives the boat onto the trailer.
How tall should boat trailer guides be?
Guide posts are L-shaped and available in different widths and heights. Most are 40″ to 60″ high. They are simple to install—just attach them to the trailer frame with brackets and bolts provided, and set them between the uprights a distance about 2″ wider than the widest beam of the boat.
Do you need trailer guides?
And no matter what kind of hull supports your boat trailer has, trailer guides can help prevent damage to the bottom of your boat. It’s very easy to run the bottom of your boat into a roller bracket, the trailer frame, or trailer fenders when trying to load your boat. The decision to put guides on my trailer was easy.
Why should a boats gas tank never be completely filled?
It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. Ensure that all air vents and valves to the gas tank are open.
Do trailer guides help?
How do you adjust the bunks on a boat trailer?
you can use your wrench to loosen the bolts that hold the bunks brackets in place on your boat trailer. Start at the most forward point of the bunk, raise the bunk until it touches the bottom of your boat and tighten until the bunk is in place.
What is a boat guide on a trailer?
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach with U-bolts to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
What are Cece Smith pontoon boat trailer guide-ons?
CE Smith Pontoon Boat Trailer Guide-Ons Pontoon boat trailer guide ons are a helpful tool to make it easier to load your boat onto your trailer and also help with backing the trailer into the water and getting your trailer in at the right depth. These…
What are the best boat trailer post guide-ons?
1. CE Smith Trailer Post Guide-On with Unlighted Posts 2. Extreme Max Heavy-Duty Roller Guide-On System 3. Fulton Economy Trailer Boat Guide 4. Extreme Max Heavy-Duty Pontoon Trailer Guide-Ons 5. CE Smith Guide-ON BUNKBOARD 2′ 6. VE-VE Inc. 47″ / 65″ Boat Trailer Post Guide-On 7. CE Smith – 27610 Guide-ON 9″ Roller & END CAPS 8.
What is a tie down floating boat trailer guide post?
Tie Down Floating Boat Trailer Guide Post The Tie Down Floating Boat Trailer Guide Post makes loading and unloading your boat trailer easy. These floating posts feature the ability to adjust the overall height from 48 to 60 inches. This post can be…
