Brush it On Start at the top and work down. Use a tampico fiber brush to apply Super Thoroseal® in a thick coat, working the mixture into the pores of the surface for a good penetrating seal. Double back and use the brush to smooth out the material. Allow 12 hours between coats for drying time.
Which is better Drylok or Thoroseal?
First, in terms of the quality of coatings, Thoroseal is a better choice. However, Drylok is simpler to apply. Also, Drylok has a greater vapor permeability. On the other hand, Thoroseal is more resistant to absorbing moisture.
How do you paint over Thoroseal?
ThoroSeal Waterproof Coating ® and ThoroSeal Foundation Coating ® should never be painted over. ThoroSeal ® Waterproofing Paint may be painted over, but wait at least 30 days to allow a full and complete cure, and then use latex paint only.
What is Thoroseal used for?
Thoroseal® 550i is a ready-to-use polymer-modified cement-based coating. It is used to waterproof and protect concrete, mortar, and masonry surfaces requiring either positive- or negative-side waterproofing. Thoroseal® 550i can be applied by low-pressure spraying or hand troweling.
How much Thoroseal do I need?
For improved curing, better physical properties and improved bonding capability in extreme environments or on dense or questionable surfaces, reduce the dilution ratio to 1:2 or 1:1. A 50 lb. (22.7 kg) bag of Thorseal® requires approximately 6-8 quarts of mixing liquid.
What is the best waterproofing for concrete?
When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.
How many coats of Thoroseal are there?
Mixed with clean water to a slurry consistency, Super Thoroseal can be applied easily with a stiff handbrush, broom, or spray equipment. Just clean the surface of dust and other particles before application. Next, add 1.5 liters of water for every can and shake the can well. Then apply two coats on the surface.
Is there anything better than DryLok?
per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.
Can you tint Thoroseal?
The two formulas differ for our purposes only in that Thoroseal is more expensive and can be dyed more easily to a desired color whereas Thoroseal Foundation coating is gray, and is suitable for use in situations where the desired hue is one of the darker shades: gray, brown, or black.
Can you paint Thoroseal stick?
What is Super Thoroseal? Super Thoroseal is suitable for a variety of waterproofing applications, including above and below grade concrete and masonry waterproofing. It cannot be applied to painted surfaces.
What is super ThoroSeal?
Super Thoroseal is a blend of Portland cements, selected aggregates and spray dried polymer modifying agents. The aggregates are carefully graded. When mixed with clean water to a slurry consistency, Super Thoroseal can be applied easily with a stiff hand brush, broom or spray equipment.
Can you plaster over Thoroseal?
Where finishing is likely to be delayed for some time, the THOROSEAL® SUPER should be sand-dashed immediately after application to aid adhesion. Do not use a Gypsum based plaster directly over THOROSEAL® SUPER.
How do you apply Super thoroseal?
Mixed with clean water to a slurry consistency, Super Thoroseal can be applied easily with a stiff handbrush, broom, or spray equipment. Just clean the surface of dust and other particles before application. Next, add 1.5 liters of water for every can and shake the can well.
What is Super thoroseal waterproof coating?
The waterproofing can be used on cinder blocks, concrete, stucco, brick and other hard, porous surfaces. Super Thoroseal waterproof coating fills and seals pores and voids, to ensure complete protection against water penetration or weather conditions.
What is supersuper thoroseal and how does it work?
Super Thoroseal works through its crystallization process. Thoroseal fills in the voids and gaps inside the concrete so that water cannot penetrate, thereby providing superior long-term waterproofing protection. It penetrates into and becomes part of the cement structure, allowing it to withstand negative and positive water pressure.
How long does Super thoroseal stay spreadable?
Super Thoroseal stays spreadable for about 30 minutes. Do not pour water into the Super Thoroseal bucket. The water must be poured into a separate bucket and the powder dumped on top! Application: Wet the walls with a garden hose and apply the mixed batter using a tampico fiber brush (also available at the big box).
