How do I setup my Uniden scanner?

How do you program a Uniden Bearcat scanner frequencies?

Press HOLD.
Enter desired Channel (Not Frequency)
Press HOLD.
Press the FUNC key.
Press E.
Enter in the Frequency you want to program.
Press E to store the frequency in. Done!

How do you use a Uniden Bearcat BC350A?

How to Program a Uniden Bearcat BC350A Scanner

Press “Hold” when the scanner stops on a frequency you want to store. Watch for the “HOLD” icon on the screen.
Press “PROG” to enter the programming mode.
Press “PROG” to exit the programming mode once you have stored all of the frequencies you want to save.

How do I find my local police frequency?

One way to find frequencies is by asking a retailer of police scanners. Local directories also help you find the information you need, since the frequency depends on which county or state you live in. But by far, the quickest and most accurate route is through the internet.

What frequency do police scanners use?

The Baofeng and similar radios will program any public safety frequency in the VHF (150-174 MHz) and UHF (450-475MHz) bands. They will not interface with the upper UHF bands in the 700/800MHz frequency ranges or operate on trunked or cellular-based systems.

How do you reset a Uniden Bearcat bc350a?

Press and hold the L/O and PROG buttons. While holding L/O and PROG, turn the scanner on. Release the L/O and PROG buttons. The scanner has been reset to factory-new status.

How do you program a police radio?

Step 1: Download the programming software on your For instance, recommended police scanners like Uniden and Whistler have Sentinel and EZ Scan, respectively. If your police scanner doesn’t have a software program included, you have other options like FreeSCAN, Butel, and ScanControl.