Launch your DAW, navigate to its audio settings, and select the Zoom as the primary recording device. Select the input source by pressing the Mic (the H4n Pro’s built-in microphone), 1, or 2 button on the side, and then press record within your DAW to start recording.
How do you set up a Zoom recorder?
How to start a local recording
- Start a Zoom meeting as the host.
- Click Record .
- If there is a menu, select Record on this Computer.
- Click Participants to see which participants are currently recording.
- After the meeting has ended, Zoom will convert the recording so you can access the files.
How do I connect my zoom H4n to my computer?
Directions:
- Plug in your Zoom H4N to your computer via usb cable.
- Use the menu scroller to scroll down to Audio I/F and select.
- Scroll down to ‘Connect’ and select.
- On your computer, select H4N from your microphone input preferences.
How do I use my Zoom H4n as a USB mic?
To use the Zoom H4n as a USB microphone connected to a computer:
- Connect the USB cable (included with the H4n) to a computer and the H4n.
- Turn on the Zoom H4n by sliding the power switch down for about 1 second.
- Use the menu scroller to select Audio I/F and then Connect.
How do I record on H4n?
Press the record button on the face of the H4n. The ring around the record button will begin to blink. The Zoom is not yet recording, but the inputs are active. This is a good time to make sure you can hear your subject well enough, and that the recording levels are not too high or distorted.
What is mono mix on Zoom H4n?
If you’ve upgraded to the Zoom H4 2.0 firmware, you can record in mono mix, which means both your left and right channel will have identical data. You can use the 4-track recorder mode.
What is the difference between Zoom H4n and H4n pro?
Today Zoom have announced the latest version, the H4n Pro. At first glance you can mistake it for its predecessor. It has the same hand holdable form factor and a similar layout. Like its predecessor it also has onboard X/Y Mics as well as two XLR/TRS inputs.
Is Zoom H4n a good audio interface?
The Zoom H4n Pro is first and foremost a 4-track recorder, but it’s also a fine USB interface, so let’s get into some specifics. The flexibility of the H4n Pro means you can mount it on a camera hotshoe and capture high-quality audio which you can sync to video.
Can I use zoom H4n as external mic?
With an efficient setup, you can use your Zoom H4n recorder as a USB mic and an audio interface! Use this feature for podcasts, Zoom calls, recording, and live-streaming performances.
How do I connect the Zoom H4n pro to my computer?
Follow these steps to set up the Zoom H4n Pro with your computer. Navigate to USB within the MENU, and then select Audio I/F. Select the sample rate you wish to set the device to, select Connect, and connect the device to the computer. PC Users: Download the Zoom H4n Pro ASIO driver here before you connect the device.
How do I power the H4n pro?
The H4n Pro can be powered by a standard power outlet or batteries. • Using a standard power outlet • Using batteries Always use the specified AC adapter. Use of an AC adapter other than the specified model could cause malfunction. Specified AC adapter: ZOOM AD-14A/D Install two AA batteries.1 Open the battery compartment cover. NOTE:
What kind of microphone configuration does the H4n Pro have?
The H4n Pro utilizes an XY stereo mic configuration. By placing two microphones in a crossed pattern (opposite angles), the H4n Pro can cover a wide area and capture sound sources in the center with clarity and definition.
How do I install the Zoom H4n pro ASIO driver?
PC Users: Download the Zoom H4n Pro ASIO driver here before you connect the device. Launch your DAW, navigate to its audio settings, and select the Zoom as the primary recording device.
