Power on/off To REBOOT, hold down both the [FUNC] and [CLEAR] keys on the terminal at the same time. To POWER OFF, remove the terminal from its base and hold down both the [FUNC] and [CLEAR] keys at the same time.
Why is my credit card machine not printing?
No Print being displayed on the till roll – If the card machine till roll has no print facility, the till roll is in the wrong way. Simply remove the existing till roll from the card unit and turn it around and re-print. The paper should always be coming up from the lever. The roll will then display the thermal ink.
How do you set up a card machine?
Connect and charge
- Connect the power. Connect the power lead to the base unit.
- Plug the power lead into the mains. Remember to turn the power on at the wall.
- Put your card machine on its base.
- Leave it for a couple of hours.
- Power up your card machine.
- Pair your card machine and base unit.
- Get to know your card machine.
How do I connect my Ingenico Bluetooth?
Android Device
- On the Android device, perform the following: Open Settings. Tap Bluetooth. Swipe the toggle button to switch on Bluetooth.
- On Ingenico iCMP, confirm that the Welcome screen appears.
- On the Android device, confirm that Ingenico iCMP appears in the Paired Devices list.
How do I unlock my Ingenico iwl250 card?
Try a soft reboot.
- Hold down the clear button and the punctuation button (below the 9 key) at the same time for 3-5 seconds, until the terminal turns off.
- Once off, hold the enter button until the terminal powers on.
- Try the transaction again.
What is the iwl252 Bluetooth?
iWL252 Bluetooth Overview. The iWL252 Bluetooth terminal is programmed to provide a secure, wireless payment solution that allows merchants to take payments via bluetooth anywhere within their restaurant or retail location.
What is the TD iwl252/255 solution?
The TD iWL252/255 Solution The terminal is solely for you, the Merchant. You will use the terminal to initiate transactions for customer’s using credit or debit cards. Depending on your settings, some card types may not be accepted by your terminal.
How do I know if my device is a labeled iwl250?
Each iWL252 terminal is LABELED IWL250 as it is part of the Ingenico iWL250 series of terminals. The sticker on the back cover of the terminal will verify the device is an iWL252 Bluetooth terminal. The iWL252 terminal SERIAL NUMBER can also be found on the sticker on the back cover of the terminal.
