How do I get a supra shackle code?

Logon to SupraWEB

1. Go to SupraWEB .
2. Click on LISTINGS in the top navigation bar.
3. Click on KeyBoxes.
4. Click on a KeyBox serial number. The shackle code will be displayed in the KeyBox settings.

Where is the shackle code in supra iBox?

Obtain a Keybox Shackle Code/CBS Code Report When you hear “Hello this is KIM”, enter your key serial number followed by the PIN code you use to open keyboxes. Choose option 5 for a report. Choose option 2 for email reports. Choose option 5 to request a list of your keyboxes, shackle codes, and CBS codes.

What is my shackle code?

A shackle code is a cryptographic system used in radio communications on the battle field by the US military and the Rhodesian Army. It is specialized for the transmission of numerals. Each of the letters of the English alphabet were assigned a numeric value.

Can you reset a supra key safe?

Press down on the CLEAR button (located in the centre of the KeySafe) and then release. Press down on the OPEN button and remove the lid (the part with the black buttons). Slide the white plastic instruction card on the back of the lid out and remove. This will reveal ten grey buttons on the back of the lid.

How do I reprogram my Supra lockbox?

1. Turn on the keybox.
2. Open the Supra eKEY app and select My Keyboxes.
3. Select a keybox.
4. Select Program Keybox.
5. Select Shackle Code.
6. Enter and verify new shackle code.
7. Select Save.
8. Select Program.

How do you program a supra Ibox?

1. Turn on the keybox.
2. Open the Supra eKEY app and select My Keyboxes.
3. Select a keybox.
4. Select Program Keybox.
5. Select Timed Access to enable or disable.
6. Select desired access hours.
7. Select Program.
8. Enter shackle code.

How do you open a vault lock box without the code?

How to Open a Lockbox without the Code

1. Step 1: Insert the pick to the gap located at the first number. Insert the pick inside the gap located at the first number.
2. Step 2: Look for the loose spot in the wheel.
3. Step 3: Repeat the process for the remaining numbers until you open the lock.

How do you reset the code if you forgot the safe?

If you’ve forgotten your passcode, you can reset it by using a thin rod or wire to press the reset button on the inside of the door panel. If all else fails, you can try breaking open the lock or drilling through the override key slot.

How do I change the Shackle code on my supra Ekey?

1. Turn on the keybox. 2. Open the Supra eKEY app and select My Keyboxes. 3. Select a keybox. 4. Select Program Keybox. 5. Select Shackle Code. 6. Enter and verify new shackle code. 7. Select Save. 8.

How do I use the supra IBox?

The Supra iBox is an electronic keybox that is placed on listings and holds the listing’s keys. The iBox can be accessed using a Supra eKEY®, ActiveKEY®, or DisplayKEY®. Please refer to the user instructions provided with your key for information on operation. The iBox uses infrared technology to communicate with Supra keys.

How do I program a keybox to my supra Ekey?

1. Turn on the keybox. 2. Open the Supra eKEY app and select My Keyboxes. 3. Select a keybox. 4. Select Program Keybox. 5. Select Shackle Code.

How do I remove the shackle from an iBox?

Each iBox has a shackle code that releases the shackle for installation or removal at a listing. To remove the shackle completely, repeat the release shackle procedure.To replace the shackle, line up the shackle and push down until it clicks into place. You never need to replace the battery in the iBox because it uses a long-life lithium battery.