1. SET UP TP-LINK EXTENDER WITHOUT WPS BUTTON
- Firstly, plug-in the TP-Link Extender into an electrical outlet and connect it with your PC via Ethernet cable.
- Then, open your internet browser and visit TPlinkrepeater.net.
- Select Quick Setup > Region and then click on Next.
What if there is no WPS button on the router?
If your router doesn’t have a WPS button, you can use the web based set-up with an internet browser to set up your Wi-Fi connection. The instructions for this method usually come with your router device.
Where is WPS button on TP-Link extender?
The button is a physical button, usually found on the back of a router, hopefully labelled WPS. Some TP-Link extenders also have WPS buttons so you can use this to set it up. Plug the TP-Link extender into a power outlet close to your wireless router. Press the WPS button on the back of the router.
Does a wifi extender have a WPS button?
Press the WPS button on your extender. The WPS LED blinks. Within two minutes, press the WPS button on your router. The extender WPS LED lights and stays solid.
Can I use WiFi extender without access to router?
No you cant. You need to be able to access the router at least through the software interface. Otherwise anyone could simply attach a repeater to a wireless signal and tap into that feed. You need to be able to configure the router security.
What is the IP address of TP-Link extender?
Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.
How do I know if my router is WPS enabled?
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.
How do I enable WPS on my router?
Turn On / Off Wi-Fi Protected Setup (WPS) – LTE Internet (…
- Access the router configuration main menu.
- From the Top menu, click.
- Click.
- Under Turn Wireless On (step 6 on the Basic Security Settings section), ensure WPS is set to On / Off.
- Scroll to the bottom of the page then click.
How do I connect my wifi extender to my router without WPS?
If your router doesn’t support WPS, go to ‘Method 2 – Without WPS button’ opposite. 1 Plug the extender into a power socket near your broadband wireless router (e.g. in the same room). Check the extender On/Off button on the top is switched on. Wait 20 seconds for the extender to boot up.
How do I connect my WiFi extender to my router without WPS?
Can I use a range extender to pick up my neighbors Wi-Fi?
Install a repeater or extender. Just find a location in your house where you get a decent signal from your neighbor’s wifi, then install the extender. They normally just plug into a power outlet. Connect the extender to the wireless network per the instructions, and you are up and running.
How do I connect my TP Link extender?
Plug your TP-Link extender into a wall outlet. Connect it to your computer with an Ethernet cable. Open a browser on your computer and navigate to If that doesn’t work, try You should see a TP-Link web page appear. Select Quick Setup and Next.
How to set up a TP-Link router?
Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter.
What is TP Link driver?
TP-LINK TL-WN721N Driver is a program developed by TP-LINK. A scheduled task is added to Windows Task Scheduler in order to launch the program at various scheduled times (the schedule varies depending on the version). The main program executable is TWCU.exe. The software installer includes 3 files and is usually about 2.64 MB (2,769,280 bytes).
What is a TP Link router?
A router is a networking device which connects two or more networks and forwards data packets between them. The TP Link or some other brand’s router will enable connecting the residential or office network (LAN) with the internet (WAN).
